Loading...

Windows 10 compatibility with McAfee products
技術的な記事 ID:   KB85784
最終更新:  6/14/2019
評価:


環境

Multiple McAfee business and enterprise products

Microsoft Windows 10 version 1903 (May 2019 Update)
Microsoft Windows 10 version 1809 (October 2018 Update)
Microsoft Windows 10 version 1803 (April 2018 Update)
Microsoft Windows 10 version 1709 (Fall Creators Update)
Microsoft Windows 10 version 1703 (Creators Update)
Microsoft Windows 10 version 1607 (Anniversary Update)
Microsoft Windows 10 version 1511 (November Update)
Microsoft Windows 10 version 1507

NOTE: This article applies only to McAfee business and enterprise products. If you need information or support for McAfee consumer or small business products, visit https://service.mcafee.com.

概要

Recent updates to this article
 
Date Comments
June 14, 2019 Updated that Host IPS 8.0 Patch 13 is General Availability.
June 13, 2019 Updated that ENS 10.5.5 May Update and VirusScan Enterprise 8.8 Patch 13 are General Availability.
June 5, 2019 Updated the "Compatibility with Windows 10 versions 1709, 1803, 1809, and 1903" section to state that ENS 10.5.5 or 10.6.1 May Update must be present on the system before upgrading to Windows 10 May 2019 Update (version 1903).
Updated to indicate that VSE 8.8 Patch 13 is available as RTS, with GA to be released.
May 29, 2019 Added that ENS 10.5.5 May Update (Released to Support) supports Windows 10 version 1903 (May 2019 Update).
May 24, 2019 Added MNE 5.0.0 to Windows 10 version 1903 (May 2019 Update).
May 22, 2019 Updated for Windows 10 version 1903 (May 2019 Update).

To receive email notification when this article is updated, click Subscribe on the right side of the page. You must be logged on to subscribe.


Compatibility with Windows 10
Click to expand the section that you want to view.

McAfee is committed to supporting the Microsoft release cadence for Windows 10 and is working closely with Microsoft to make sure that McAfee security software and hardware products are fully compatible with Windows 10 endpoints.

To make sure release quality, all new releases that Microsoft publishes for Windows 10 require full validation by the individual product teams. The McAfee goal is to add same-day support for all Windows 10 releases over time, for those products that do not currently offer this cadence.

Late-breaking changes implemented by Microsoft to a release, or any unresolved compatibility issues raised by McAfee with Microsoft around a scheduled release, could lead to schedule changes. We will document any changes in this article.

NOTES:
  • Additional information regarding Windows 10 support for McAfee products will use standard McAfee communication methods including the Support Notification Service (SNS).
    To receive information about McAfee product updates, sign up for the Support Notification Service at https://sns.secure.mcafee.com/signup_login.
  • Future release dates are subject to change.
    NOTE: Any future product functionality or releases mentioned in the Knowledge Base are intended to outline our general product direction and should not be relied on, either as a commitment, or when making a purchasing decision.
  • GA = General Availability
  • RTS = Released To Support, also called Managed Release. RTS packages can be obtained by contacting Technical Support.
    To contact Technical Support, log on to the ServicePortal and go to the Create a Service Request page at https://support.mcafee.com/ServicePortal/faces/serviceRequests/createSR:
    • If you are a registered user, type your User Id and Password, and then click Log In.
    • If you are not a registered user, click Register and complete the required fields. Your password and logon instructions will be emailed to you.
  • For details about Service Packs, updates, hotfixes, maintenance releases, and the release cycle, see KB51560.
  • For details about a support statement for verifying and validating Microsoft updates, see KB50473.

Compatibility with Windows 10 Versions 1709, 1803, 1809, and 1903
 
McAfee Products Win 10
Version
1709
(Fall Creators Update)
Win 10
Version
1803
(April 2018 Update)
Win 10
Version
1809
(October 2018 Update) 
Win 10
Version
1903
(May 2019 Update)
  Minimum Supported McAfee Product Version
Endpoint Protection Products1  
Active Response (MAR) 2.0.1 2.2 2.3 2.3
Application and Change Control (MACC) 8.0.x 8.0.14
8.1.04
8.2.1
8.0.2
To be Released
Data Loss Prevention Endpoint (DLP Endpoint) 11.0.130
10.0.330
11.0.300 11.0.600 11.2.0
Endpoint Security (ENS) 10.5.3
10.2.2
10.5.4
10.6.0
10.5.5
10.6.1
ENS 10.5.5 May Update6
10.6.1 May Update6
ENS Adaptive Threat Protection (ATP) 10.5.3 10.5.4
10.6.0
10.5.5
10.6.1
ENS 10.5.5 May Update6
10.6.1 May Update6
Endpoint Security Threat Intelligence 10.2.3 Not supported Not supported Not supported
Host Intrusion Prevention System (Host IPS) 8.0 Patch 10 8.0 Patch 11 8.0 Patch 12 8.0 Patch 13
MVISION Endpoint 1808 (18.8.x) 1808 (18.8.x) 1809 (18.9.x) 1904 (19.4.x)
SiteAdvisor Enterprise (SAE) 3.5 Patch 5 3.5 Patch 6 3.5 Patch 6 3.5 Patch 6
Threat Intelligence Exchange (TIE) Module for VSE 1.0.2 1.0.2 1.0.2 1.0.3.134
VirusScan Command Line Scanner (VSCL) 6.1.0 6.1.0 6.1.0 6.1.0
VirusScan Enterprise (VSE) 8.8 Patch 10 8.8 Patch 11 8.8 Patch 12 8.8 Patch 13
   
Database Security Products  
Database Activity Monitoring (DAM) (Standalone Management) n/a n/a n/a n/a
Database Activity Monitoring (DAM) (ePO Management) n/a n/a n/a n/a
Vulnerability Manager for Databases (DVM) (Standalone Management) n/a n/a n/a n/a
Vulnerability Manager for Databases (DVM) (ePO Management) n/a n/a n/a n/a
   
Data Center Protection Products  
Management for Optimized Virtual Environment (MOVE) Multi-platform 4.6
4.5
4.7
4.6
4.5
4.8 4.8
   
Data Protection Products  
Drive Encryption (DE)2, 3 7.2.2 7.2.4 7.2.5 7.2.8
File and Removable Media Protection (FRP)3 5.0.4 5.0.5 5.0.5 5.0.10
Management of Native Encryption (MNE) 4.1.1 4.1.3 4.1.3 5.0.0
4.1.5
   
Security Management Products  
Data Exchange Layer (DXL) 4.0.0 4.1.0 5.0.0
4.1.2
4.0.0 Hotfix 8
5.0.1
ePO Deep Command5 n/a n/a n/a
 
n/a
McAfee Agent (MA) 5.0.6
5.0.5
4.8.0 Update 3
5.5.0
5.0.6
5.0.5
4.8.0 Update 3
5.5.1
5.5.0
5.0.6
5.0.5
4.8.0 Update 3
5.6.0.940
5.5.1
5.0.5
Policy Auditor (PA) 6.3
6.2.2
6.3
6.2.2
6.4.1
6.4
6.3
6.2.2
6.4.1
Rogue System Detection (RSD) 5.0.5 5.0.5 5.0.5 5.0.5
   
Web Protection  
McAfee Client Proxy (MCP) 2.3.2 2.3.4 2.3.5 2.4.0

n/a = not available
HF = Hotfix
TBD = To be decided
 
1 SaaS Endpoint Protection 6.0 does not support Microsoft Windows 10.0. If you try to install Windows 10.0 while running SaaS Endpoint Protection 6.0, it asks you to uninstall it.
If you are running SaaS Endpoint Protection 6.0, uninstall it and install ENS 10.0. ENS 10.0 Update 1 supports Windows 10.0.
2 IMPORTANT:
  • Same-day in-place upgrade to Windows 10 is fully supported with DE 7.2.1 and later, by running setup.exe, with no need for scripts or command-line arguments, when setup.exe is initiated from the Microsoft WSUS mechanism.
    • For DE 7.1.3 and 7.2.0 and later, reflect drivers parameter must be used when executing setup.exe directly.
      • For Windows Anniversary Update (Version 1607) only, see KB87909.
      • For Windows 10 Creators Update (Version 1703) and later, see KB89000. If the organization administrator runs the setup.exe directly, setup.exe must include the additional command-line options.
  • In-place upgrade to Windows 10 (versions 1507 and 1511) with DE 7.1 Update 3 (7.1.3) or FRP 5.0.1 installed is supported. But, it requires specific steps be taken as part of the Windows 10 upgrade for it to be successful. For details, see the required article:
    • For detailed instructions and sample scripts that can be tailored to suit the customer environment for DE, see KB84962.
    • For detailed instructions for FRP, see KB87550.
  • DEGO deployment to Windows 10 clients fails. This issue is resolved by installing DE 7.1 Update 3 Hotfix 1087719 (build 7.1.3.554) or later. For details, see KB85514.
3 For information about support for Device Guard with DE and FRP, see KB86009.
4 MACC8.0.1 and 8.1.0 are supported only if Microsoft KB4103721 or the latest updates are installed before installation.
5 ePO Deep Command reached end of life (EOL) on April 10, 2018. See KB88454 for details.
6 ENS 10.5.5 or 10.6.1 May Update must be present on the system before upgrading to Windows 10 May 2019 Update (version 1903). There is no ENS installer that allows a fresh installation of ENS on a system with Windows 10 May 2019 Update.

Back to top
Windows 10 devices running versions listed below no longer receive security and quality updates. Microsoft recommends updating devices to the latest version of Windows 10.

To view the Microsoft Windows lifecycle fact sheet, see https://support.microsoft.com/en-gb/help/13853/windows-lifecycle-fact-sheet

Compatibility with Windows 10 Versions 1507 ,1511, 1607, and 1703 (end-of-service)
McAfee Products Win 10
Version
1507

 
Win 10
Version
1511

(November Update)
Win 10
Version
1607


(Anniversary Update)9
Win 10
Version
1703


(Creators Update)10
Minimum Supported McAfee Product Version
Endpoint Protection Products1    
Active Response 1.1.0 HF1.1.0.161 1.1.0 HF1.1.0.161 1.1.0.212 2.01
2.0
Application and Change Control 7.0 7.0 7.0.1 7.0.17
8.0.x
Data Loss Prevention Endpoint (DLP Endpoint) 11.0
10.0
9.4 Update 1
9.3 Update 6
11.0
10.0
9.4 Update 1
9.3 Update 6
11.0
10.0.100
9.4.230
9.3.630
11.0
10.0.250
9.4.300
Endpoint Security (ENS) 10.1 (major release)
10.0.1 (update)
10.1 (major release)
10.0.1 (update)
10.2
10.1.2
10.5.1
10.2.1
ENS Adaptive Threat Protection (ATP) 10.5.1 10.5.1 10.5.1 10.5.2
Endpoint Security Threat Intelligence n/a n/a 10.2
10.1 Update 2
10.2.2
Host Intrusion Prevention (Host IPS) 8.0.0 Patch 6 8.0.0 Patch 6 8.0 Patch 8 8.0 Patch 9
MVISION Endpoint n/a n/a n/a n/a
SiteAdvisor Enterprise (SAE) 3.5 Patch 44 3.5 Patch 44 3.5 Patch 5 3.5 Patch 5
Threat Intelligence for Endpoint Security Client 10.1 10.1    
Threat Intelligence Exchange (TIE) Module for VSE 1.0.1 1.0.1 1.0.2 1.0.2
VirusScan Command Line Scanner (VSCL) 6.0.6 6.0.6 6.1.0 6.1.0
VirusScan Enterprise (VSE) 8.8.0 Patch 6 8.8.0 Patch 6 8.8.0 Patch 8 8.8 Patch 9
     
Database Security Products    
Database Activity Monitoring (Standalone Management) 4.4.9 4.4.9 4.6.0 n/a
Database Activity Monitoring (ePO Management) 5.1.3 Update 2 5.1.3 Update 2 5.2.0 n/a
Vulnerability Manager for Databases (Standalone Management) 4.4.9 4.4.9 4.6.0 n/a
Vulnerability Manager for Databases (ePO Management) 5.1.3 Update 2 5.1.3 Update 2 5.2.0 n/a
     
Data Center Protection Products    
Management for Optimized Virtual Environment (MOVE) Multi-platform 3.6.1 3.6.1 4.6
4.5
4.6
4.5
     
Data Protection Products    
Drive Encryption (DE)2, 5 7.1.3 7.1.3 7.2.0
7.1.3 HF1148978
7.2.1
File and Removable Media Protection (FRP)5 5.0.x
4.3.1 HF10621183
5.0.x
4.3.1 HF10621183
5.0.2
5.0.1 HF1150417
5.0.38
Management of Native Encryption (MNE) 3.0.0 3.0.0 4.1.0 4.1.1
     
Security Management Products    
Data Exchange Layer (DXL) 2.0.0 2.0.1 2.2.0 3.1.0
ePO Deep Command6 2.4 2.4 n/a n/a
McAfee Agent (MA) 5.0.2
4.8.0 Update 3
5.0.2
4.8.0 Update 3
5.0.4
4.8.0 Update 3
5.0.5
4.8.0 Update 3
Policy Auditor (PA) Agent  6.2.0.309 6.2.0.2309 6.2.0.309 6.2.2
Rogue System Detection 5.0.3 5.0.3 5.0.4 5.0.5
     
Web Protection    
McAfee Client Proxy (MCP) 2.1 2.1 2.1.0.177 2.3
 
1 SaaS Endpoint Protection 6.0 does not support Microsoft Windows 10.0. If you try to install Windows 10.0 while running SaaS Endpoint Protection 6.0, it asks you to uninstall it.
If you are running SaaS Endpoint Protection 6.0, uninstall it and install ENS 10.0. ENS 10.0 Update 1 supports Windows 10.0.
2 IMPORTANT:
  • Same-day in-place upgrade to Windows 10 is fully supported with DE 7.2.1 and later, by running setup.exe, with no need for scripts or command-line arguments, when setup.exe is initiated from the Microsoft WSUS mechanism.
    • For DE 7.1.3 and 7.2.0 and later, reflect drivers parameter must be used when executing setup.exe directly.
      • For Windows Anniversary Update (Version 1607) only, see KB87909.
      • For Windows 10 Creators Update (Version 1703) and later, see KB89000. If the organization administrator runs the setup.exe directly, setup.exe must include the additional command-line options.
  • In-place upgrade to Windows 10 (versions 1507 and 1511) with DE 7.1 Update 3 (7.1.3) or FRP 5.0.1 installed is supported. But, it requires specific steps be taken as part of the Windows 10 upgrade for it to be successful. For details, see the required articles:
    • For detailed instructions and sample scripts that can be tailored to suit the customer environment for DE, see KB84962.
    • For detailed instructions for FRP, see KB87550.
  • DEGO deployment to Windows 10 clients fails. This issue is resolved by installing DE 7.1 Update 3 Hotfix 1087719 (build 7.1.3.554) or later. For details, see KB85514.
3 For details about FRP 4.3.1 HF1062118, see KB84829. This hotfix is available on the Product Downloads site as a separate item on the FRP 4.3.1 download page.
4 SAE 3.5 Update 4 HF1076106 adds support for Mozilla Firefox.
5 For information about support for Device Guard with DE and FRP, see KB86009.
6 ePO Deep Command reached end of life (EOL) on April 10, 2018. See KB88454 for details.
7 MACC 7.0.1 is supported only if Microsoft KB4103722 or KB4103731 or the latest updates are installed before installation.
8 A minimum Windows 10 Creators Update Version 1703 (OS build 15063.250) is required for support with FRP 5.0.3. For more information, see the Microsoft article KB4016240 https://support.microsoft.com/en-gb/help/4016240/windows-10-update-kb4016240

CAUTION: Installation or upgrade with earlier builds of Windows 10 Creators Update fails.
9 KB87536 (Incompatibility between the Windows 10 Anniversary Update and multiple McAfee products) has been redirected to this article because KB87536 became obsolete. The Windows 10 Anniversary Update now performs the needed upgrade and installation checks to make sure that no incompatible McAfee product versions can be installed or present. It also blocks the upgrade if they are present.
10 CAUTION: If Device Guard or Credential Guard is enabled on a Windows 10 Creators Update 64-bit system, you must make sure that Microsoft KB4016251 is installed on the system, before you install McAfee products. For more information, see KB89029.


Back to top

以前のドキュメント ID

KB84419

このドキュメントを評価する

Beta Translate with

Select a desired language below to translate this page.

技術用語集


 用語集にある用語をハイライトする

当社の技術用語集を参照してください。