How to upgrade to Windows 10 with Application and Change Control deployed

Artigos técnicos ID: KB86551
Última modificação: 5/20/2020

Ambiente

McAfee Application and Change Control (MACC) 8.x, 7.x, 6.2.x

Microsoft Windows 10, 8.x, 7

Resumo

IMPORTANT:

Resolidification of a system must be performed after you upgrade any MACC version to MACC 8.2.1 Update 3 or MACC 8.0.2 Update 1 and later. Resolidification must be performed after the upgrade has been completed.
Resolidification of a system with MACC installed must be performed after any version upgrade of the Windows operating system. Before upgrading the operating system, place the system in Update mode. After the upgrade completes, place the system back in Enabled mode.
If you upgrade the operating system to Windows 10 before you upgrade MACC to 7.x or later, it prevents the Windows 10 driver from loading at startup. The Windows 7 driver is loaded instead.
MACC 7.x is the minimum supported version to run in a Windows 10 Version 1607 (Anniversary Update) environment. MACC must be upgraded to version 7.x before you perform the upgrade to Windows 10.
Before you upgrade to a Windows 10 Version 1703 (Creators Update) environment, McAfee Agent (MA) 5.0.3 minimum and MACC 8.x must be installed.
Because of performance issues with MA 5.0.4, McAfee recommends MA 5.0.5.

To upgrade to Windows 10 with MACC deployed, use the following instructions for your version of Windows:

Current Operating System Version	Upgrade to Operating System Version	MAC Version	MCC Version	Upgrade Steps
Windows 7	Windows 10 Version 1607 (Anniversary Update) to Windows 10 Version 1709 (Fall Creators Update)	6.2.x, 7.x, or 8.x	6.2.x, 7.x, or 8.x	Switch MACC to Update mode. Disable the Memory Protection feature (sadmin features disable MP). Disable the Script as Updater (SAU) feature (sadmin features disable SAU). Perform the upgrade from Windows 7 to Windows 10. Upgrade MACC using the Windows 10 installer.^{1, 2} NOTE: The Solidcore service might still be running on Windows upgrade. Technical Support recommends reinstalling with the proper Windows installer for Solidcore Agent because some features might not work until the proper agent is installed. Reboot the system. Run the Solidification task.¹ Enable SAU (sadmin features enable SAU). Enable Memory-Protection (sadmin features enable MP). Reboot. End Update Mode.
Windows 7	Windows 10 Version 1803 (April 2018 Update)	8.1.x	8.1.x	To perform an operating system upgrade to Windows 10 Version 1803 (April 2018 Update) with MACC, you must follow these steps: Install or upgrade the MACC extension to versions 8.1.0.129 or later in ePO. Uninstall MACC from client: Create a client product deployment task in ePO. Select Solidcore Client for Windows from the Products and components drop-down list. Set the action to Remove and push the task to all endpoints. NOTE: MACC must be disabled before you can remove it from the client. Perform the operating system upgrade to Windows 10 Version 1803 (April 2018 Update). Install MACC 8.1.0.179 or later: Check in the MACC client package to ePO. Create client product deployment task in ePO. Select Solidcore Client for Windows from the Products and components drop-down list. Set the action as Install and push the task to all endpoints.
Windows 8 or 8.1	Windows 10 Version 1607 (Anniversary Update)	7.x or 8.x	7.x or 8.x	Switch to Update mode. Upgrade to Windows 10. Run the Solidification task.² End Update mode.
Windows 10 Version 1607 (Anniversary Update)	Windows 10 Version 1703 (Creators Update)	8.x	8.x	IMPORTANT: Resolidification of the system is required after performing Windows Updates. It must be performed after the upgrade is complete. IMPORTANT: MACC 8.x and MA 5.0.3 are the minimum supported versions to run in a Windows 10 Version 1703 (Creators Update) environment. You must upgrade MACC to version 8.x and MA to version 5.0.3 before you perform the upgrade to Windows 10 Version 1703 (Creators Update). When MACC and MA have been upgraded, follow these steps: Switch MACC to Update mode. Perform the upgrade from Windows 10 Version 1607 (Anniversary Update) to Windows 10 Version 1703 (Creators Update). Run the Solidification task. End Update Mode.
Windows 10 1703 (Creators update) or any other version of Windows 10	Windows 10 (All Versions)	8.x	8.x	IMPORTANT: Resolidification of the system is required after performing Windows Updates. It must be performed after the upgrade is complete. IMPORTANT: MACC 8.x and MA 5.0.3 are the minimum supported versions to run in a Windows 10 Version 1703 (Creators Update) environment. You must upgrade MACC to version 8.x and MA to version 5.0.3 before you perform the upgrade to Windows 10 Version 1703 (Creators Update). When MACC and MA have been upgraded, follow these steps: When MACC and MA have been upgraded, follow these steps: Switch MACC to Update mode. Perform the upgrade to Windows 10. Run the Solidification task. End Update Mode.

¹	The MACC installer packages for Windows 7 and Windows 10 are different. Use the operating system-specific installers to deploy MACC on Windows 7 and Windows 10.
²	Required only with a MAC license, not with an MCC license.

Produtos afetados

Application and Change Control 8.2.x
Application and Change Control 8.1.x
Application and Change Control 8.0.x
Application and Change Control 7.0.x
Application and Change Control 6.2.x
Upgrade/Migrate

Idiomas:

Este artigo está disponível nos seguintes idiomas:

German
English United States
Spanish Spain
French
Italian
Japanese
Korean
Dutch
Portuguese Brasileiro
Chinese Simplified
Chinese Traditional

Glossário de termos técnicos

Realçar termos do glossário

Reserve alguns momentos para navegar por nosso Glossário de termos técnicos.

Knowledge Center

How to upgrade to Windows 10 with Application and Change Control deployed

Ambiente

Resumo

Produtos afetados

Idiomas:

Glossário de termos técnicos

Title

Title

Knowledge Center

How to upgrade to Windows 10 with Application and Change Control deployed

Ambiente

Resumo

Produtos afetados

Idiomas:

Glossário de termos técnicos

Escolha a sua região

Title

Title