1. Start the CLI for Solidifier, or open the Administrator CMD.EXE prompt.
2. Run sadmin recover and provide the Application Control administrator password.
3. Run the following command:
   
   sadmin config set IsInvbackupEnabled=1
    
4. Lock the CLI with the sadmin lockdown command.

Solidcore SC:Run Commands task

1. In the ePO Server console, under Policy, Client Task Catalog, create a Solidcore, SC:Run Command task.
2. Specify the Run Commands value to:
   
   config set IsInvbackupEnabled=1
    
3. Save the task. 
4. Assign this task to the client in the ePO Server Client Task Assignments menu, or use the Run Client Task Now feature.

To verify whether the feature is enabled (1) or disabled (0), use any of the below methods:

Registry Check

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\swin\Parameters\IsInvBackupEnabled

Solidcore CLI command check

1. Start the command line interface for Solidifier, or open Administrator CMD.EXE prompt.
2. Run sadmin recover and provide the Application Control administrator password.
3. Run the following command: 
   
   sadmin config show IsInvbackupEnabled
    
4. Lock the CLI via sadmin lockdown.

Solidcore SC:Run Commands task

1. In the ePO Server console, under Policy, Client Task Catalog, create a Solidcore, SC:Run Command task.
2. Specify the Run Commands value to:
   
   config show IsInvbackupEnabled
    
3. Enable the Requires Response option.
4. Save the task.
5. Assign this task to the client in the ePO Server Client Task Assignments menu, or use the Run Client Task Now feature.
6. When the task finishes on the client, perform a wake-up call to the client, or wait for the next McAfee Agent ASCI (agent-server communication interval).
7. Review the client task results in the ePO server console under Automation, Solidcore Client Task Log menu.